Sewer Flush Nozzle

Pipe Range: From 2", Up to 24" | Hose: 1/4" to 1 1/4" | Tier Two Fluid Mechanics

The KEG Sewer Flush Nozzle is a heavy dragging Tier Two nozzle for general sanitary sewer cleaning in lines up to 24". Rear jets at 15 and 25 degrees deliver high wall force with a wide water pattern.

Sizes run from 1/4" to 1 1/4" hose, with 4 to 12 rear inserts depending on size. The 1/2" and larger sizes take titanium ceramic or steel inserts, while the 1/4" and 3/8" sizes are steel only. KEG positions it as a mid-range option within its Cleaning Nozzle Family.

Advantages

• 15 and 25 degree dual jet angles
• High wall force with a wide water pattern
• Heavy dragging nozzle
• Replaceable threaded inserts

Applications

• Sanitary sewer cleaning
• General sewer cleaning in pipe up to 24"
• Small lines from 2" with 1/4" hose
• Mid-range complement to KEG Cleaning Family nozzles

Sizes and KEG Part Numbers

Choosing the Right Version

• The 1/4" (100100) and 3/8" (100098) sizes are offered with steel inserts only. The 1/2" through 1 1/4" sizes can be ordered with titanium ceramic or steel inserts under the same KEG part number.
• Minimum pipe size rises with nozzle size, from 2" for the 1/4" up to 8" for the 1 1/4". Check the table against your line size before ordering.

How to Order Online

Select the size and insert material above. Before Add to Cart unlocks, enter your jetter's flow in gallons per minute (GPM), its operating pressure (PSI) and the length of your jet hose in feet. SECI uses these numbers to order the correct nozzle from KEG. KEG list pricing includes the nozzle, its inserts and the drill point where the nozzle has one.