Mini Chain Cutter Kit

Pipe Range: 4" up to 12" Available | Flow: 18 to 60 GPM | Tier Two Fluid Mechanics

The KEG Mini Chain Cutter Kit clears roots, scale and grease in 4", 6" and 8" sanitary and storm lines, with 10" and 12" skid options sold separately. It is also suited to root removal in laterals and sanitary service lines and to cutting back protruding taps in clay and plastic pipe.

Water jets spin the main shaft and its chain, which KEG rates at more than 7,500 RPM across its chain cutter family. The Mini carries 4 rear and 3 rotating M6 titanium ceramic inserts, a 3/4" HP swivel is the standard setup, and the 1/2" and 1" kits connect through a leader hose. The pump must supply at least 18 GPM at 1700 PSI.

Advantages

• Guide skids for 4", 6" and 8" pipe included
• Titanium ceramic M6 inserts installed (4 rear, 3 rotating)
• Includes 5 ft of chain
• Configurable for different jobs and pipe sizes
• Reducers or expanders available separately
• Cleans up with soap and water

Applications

• Sanitary and storm lines, 4" to 8"
• Roots, scaling and grease
• Root removal in laterals and sanitary service lines
• Protruding tap removal in clay and plastic pipe
• Scale and rust removal

Sizes and KEG Part Numbers

Choosing the Right Version

• Pick the kit for your hose. Per KEG's kit listings, the 1/2" kit (200343) includes a 3/4" x 1/2" HP swivel and 1/2" leader hose, the 3/4" kit (200344) a 3/4" HP swivel and 3/4" leader hose, and the 1" kit (200345) a 3/4" HP swivel and 3/4" x 1" leader hose.
• All three kits list the 3/4" Mini cutter body, M6 titanium ceramic inserts, replacement chain, 4", 6" and 8" guide skids, tool box, chain breaker, screw plug, 3 mm and 4 mm Allen wrenches and blue thread locker.
• 10" and 12" skids are sold separately.
• KEG recommends cleaning and video inspecting the pipe before running any chain cutter, and following the cutter manual.
• KEG supplies its chain cutters with titanium ceramic inserts only.

How to Order Online

Select the size above. Before Add to Cart unlocks, enter your jetter's flow in gallons per minute (GPM), its operating pressure (PSI) and the length of your jet hose in feet. SECI uses these numbers to order the correct nozzle from KEG.