M8 Drill Point Replacement Tip

Thread Size: M8 | Stainless Steel | Rambo Drill Point

This is KEG's M8 drill point replacement tip, the stainless steel drill point used on KEG Rambo penetrating nozzles. The drill point has three rear spraying jets, so it works on a blockage from within as the nozzle penetrates.

KEG lists the drill point as a replaceable part of the Rambo, and on 1/2" and larger Rambo nozzles the drill point can be removed and a standard M8 insert installed in its place. KEG groups the M8 drill point with inserts for 1/2", 3/4", 1" and 1 1/4" nozzles, specialty nozzles, floor cleaners and chain cutters, and lists a separate M5 drill point for 1/4" and 3/8" nozzles.

Advantages

• Stainless steel M8 drill point tip
• Three rear spraying jets built into the drill point
• Replaces the drill point without replacing the nozzle body
• Separate M5 drill point listed for 1/4" and 3/8" nozzles

Applications

• Replacement drill point for KEG Rambo nozzles
• Total blockages from roots, grease, ice, stone, sand and rags
• Sanitary and storm lines

Part Details

Choosing the Right Version

• KEG lists a separate M5 drill point for 1/4" and 3/8" nozzles.
• On 1/2" and larger Rambo nozzles, KEG notes a standard M8 insert can be installed in place of the drill point.