Overview
This page covers the Betts Industries 4" manual sliding valve with a replaceable O-ring seat. It is operated by hand. End connections offered on this page: TTMA flange, ANSI flange and 4" threaded pipe. Choose the end connections in the product options. Each choice is its own Betts part number, listed in the table below.
Key Features
- Replaceable O-ring seat.
- The last four letters of the part number set the material: SSTS is 316 stainless body, stem and gates.
- Betts warns that the valve should never be heated with flame.
Options & Configurations
Match the menu choice to the Betts part number. Weights are as Betts lists them.
| Betts Part Number |
End Connections |
Material |
Weight |
| SV804SSTS |
TTMA Flange x TTMA Flange |
316 Stainless Body, Stem and Gates |
14.9 lb (6.8 kg) |
| SV814SSTS |
4" Threaded Pipe x TTMA Flange |
316 Stainless Body, Stem and Gates |
14.1 lb (6.4 kg) |
| SV854SSTS |
ANSI Flange x ANSI Flange |
316 Stainless Body, Stem and Gates |
24.5 lb (11.1 kg) |
| SV864SSTS |
4" Threaded Pipe x ANSI Flange |
316 Stainless Body, Stem and Gates |
20.0 lb (9.1 kg) |
Parts Support
Betts engineering bulletin EB-1-15 covers gate and sliding valves used in hot service.
Not sure this is the right part? Call SECI at (203) 933-9599 with your equipment model and serial number, or use the parts request form.