Forward Jet Nozzle

Pipe Range: From 3" | Hose: 1/2" | Tier One | 700 PSI Max Recommended

The KEG Forward Jet Nozzle is made for residential services and other lines where water and debris must travel in one direction only. All of its jets face forward, so it drives the clog toward the sewer main and away from the house or business, with no back-flow into the structure. KEG's recommended technique is to feed the hose into the lateral by hand, start the jetter and push the clog toward the main, then shut the water off when the nozzle returns to the cleanout and repeat until the lateral is clear.

The nozzle has six factory drilled forward inserts and one interchangeable center forward insert in M6, with no rear inserts, and it fits 1/2" connections only. It comes in two configurations: 1.8 for lower flow, and 2.2 for higher flow with better control of the nozzle during debris removal. KEG lists a maximum recommended pressure of 700 psi for this nozzle for safety reasons.

Advantages

• Moves debris away from the residence or business
• No back-flow into the house or structure
• Seven forward jets, no rear jets
• Interchangeable center forward insert
• Two configurations for lower or higher flow
• Wear resistant Tier One nozzle

Applications

• Sanitary lines
• Residential applications
• Laterals and services
• Pipe from 3"

Sizes and KEG Part Numbers

Choosing the Right Version

• Choose the 1.8 configuration for lower flow or the 2.2 configuration for higher flow and better nozzle control; KEG asks for the configuration at the time of ordering.
• Maximum recommended pressure is 700 psi for safety reasons.
• Available for 1/2" connections only.

How to Order Online

Select the size above. Before Add to Cart unlocks, enter your jetter's flow in gallons per minute (GPM), its operating pressure (PSI) and the length of your jet hose in feet. SECI uses these numbers to order the correct nozzle from KEG. KEG list pricing includes the nozzle, its inserts and the drill point where the nozzle has one.